Controllers
How to manually run your sprinkler (ESP-TM2)
On a Rain Bird© ESP-TM controller it is very simple to run your sprinkler outside of the automatic schedule by manually starting your program. 1) Start with the controller dial in the AUTO position 2) Check to make sure you are in the program you ...
How to manually run your sprinkler (ESP Me, ESP ME3)
On the Rain Bird© ESP-Me and ESP-ME3 controllers it is very simple to run your sprinkler outside of the automatic schedule by manually starting your program. 1) Start with the controller dial in the AUTO RUN position. (NOTE: on the ME-3 it says ...
What does Seasonal Adjust % mean on my sprinkler controller?
There is a feature on just about every irrigation controller that makes controlling the run times a lot easier. Unfortunately, most people with irrigation systems don’t realize the feature exists, and it’s probably the easiest way to operate your ...
Why is my sprinkler system running twice?
If your sprinkler ran through its regularly scheduled programming and then starting over again a second time but shut off on its own at the end of the cycle, you have a programming error. Most controller have three sets of programming that can have ...
We had a power surge, now my controller is watering at odd times
Your controller can get a little confused with an abrupt change in power. Unplug your controller, open the face and remove the back-up battery (if applicable). The newer Rain Bird© controller models, the TM, ESPMe, ESP M3 do not have batteries. ...
My controller says “PWR OFF” or No AC
This error message indicates an electrical problem (wiring, fuse, etc.) The controller battery is operational, but it is not receiving power from the AC plug. Check to ensure the outlet the controller is plugged into is operational. Try another ...
My controller is not functioning
If you have a blank display this indicates there is some sort of electrical problem (wiring, fuse, etc.) Check to ensure the outlet the controller is plugged into is operational. Try another electronic device in the outlet or try the controller in ...
The controller is operating, but the sprinkler is not running
When your clock is counting down, but no water is coming out the heads, there are a couple things that could be happening. First and foremost check to ensure the water is ON to the system. Be sure it is turned on in the basement and both valve ...
The controller is “Off”, but the system is still running!
If the controller is turned to the “off” position and your sprinkler is still has one zone operating, it is likely a valve on the system has failed. You need to turn the water off to the system and contact the office for a service appointment. You ...